Cisco Cisco Packet Data Gateway (PDG) Manual De Manutenção

Configuration Management

Generally Available    06-30-2010 

3-96

This section provides information on ECS commands in Release 8.0.

This command assigns an action priority to a rule definition. The 

keyword was added to this command. This enables assigning a group of rule definitions to 
the rulebase.

action priority action_priority { [ dynamic-only | static-and-dynamic ] { 

ruledef name | group-of-ruledefs name } charging-action name [ description 

desc ] }

no action-priority action_priority

This functionality is not supported at this time on the Web Element Manager.

This command defines a rule definition to analyze and charge user traffic using an 
International Mobile Station Identification number (IMSI) in bearer flow. The 

range } imsi-pool imsi_pool } 

option was added to this command. This enables the 

IMSI number to be selected from a range configured in an IMSI pool.

[ no ] bearer imsi { operator msid | { !range | range } imsi-pool imsi_pool 

This functionality is not supported at this time on the Web Element Manager.

This command configures the volume counter for eG-CDR and DCCA charging 
calculation. The packet-length keyword was added to this command. This enables to 
configure charge volume for packet length.

charge-volume { protocol { bytes | packet-length | packets } [ downlink | 

uplink ] | constant value }

This functionality is not supported at this time on the Web Element Manager.