Cisco Cisco Packet Data Gateway (PDG) Manual De Manutenção
Generally Available 06-30-2010
Modified Commands
5-93
show sndcp statistics verbose
The output of this command is now enhanced with the following PDU Drop Reason
counters:
counters:
●
SN-PDU Drop Reason
●
Invalid SAPI State
●
Invalid PDP Ctx
●
Decode Failure
●
Reassembly Drops
●
Discard State
●
Rx First Seg State
●
Rx Subsequent Seg State
●
New First Segment
●
Reassembly Failure
●
Reassembly Timeout
●
DCOMP Error
●
PCOMP Error
●
PDP Ctx Modified
●
PDP Ctx Deleted
●
Other Reasons
CLI (Exec Mode)
show sndcp statistics [ verbose ]
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.
show sgtpu statistics
The output of this command is now enhanced with the following pairs of counters:
●
Total Packets Rcvd
●
Pkts forward from queue
●
BVC Reset/Block Rcvd
●
Total Bytes Rcvd
●
Bytes forward from queue
●
BVC Reset/Block Rcvd
CLI (Exec Mode)
show sgtpu statistics [ ggsn-address ipv4_address | iups-service
iups_srvc_name | rnc-address ipv4_address | sgtp-service sgtp_srvc_name |
gprs-service gprs_srvc_name nsei nse_id ]
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.