Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas
ASN PC/LR Service Configuration
▀ Configuring the ASN PC/LR Services
▄ Cisco ASR 5000 Series Access Service Network Gateway Administration Guide
OL-22953-01
Configuring the ASN PC/LR Services
This section provides basic configuration examples to create and configure a paging controller and location registry
(ASN PC/LR) service in single chassis.
(ASN PC/LR) service in single chassis.
Overview
Configure initial configuration parameters by applying the example configuration in the Initial Configuration
section.
Optional. Configure the ASN Gateway service within the newly created ASN Gateway service by applying the
example configuration in the ASN Gateway Configuration chapter.
Create ASN PC and LR service within the context by applying the example configuration in the Creating the PC
and LR Service section.
Configure the timeout duration for idle mode and paging announcements in newly created ASN PC and LR
services by applying the example configuration in the Configuring the PC and LR Service section.
Optional. Configure log system activity by applying the example configuration in the ASN PC/LR Logging
Configuration section of this chapter.
If they are not configured in ASN Gateway service, add basic subscribers to the system by applying the example
configuration in the Subscriber Configuration section.
Save the configuration by applying the example configuration in the Save the Configuration section of this
chapter.
Initial Configuration
Step 1
Specify the role of the processing cards in the chassis. The following example activates two processing cards, placing
one in active mode and labeling the other as redundant:
one in active mode and labeling the other as redundant:
Step 2
Set local system management parameters.