Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas
Pre-paid Billing
▀ Configuring Standard 3GPP2 Pre-paid Billing
▄ Cisco ASR 5000 Series Enhanced Feature Configuration Guide
OL-22982-01
Configuring Standard 3GPP2 Pre-paid Billing
This section describes how to enable standard 3GPP2 pre-paid billing support.
Important:
Commands used in the configuration samples in this section provide base functionality to the extent
that the most common or likely commands and/or keyword options are presented. In many cases, other optional
commands and/or keyword options are available. Refer to the Command Line Interface Reference for complete
information regarding all commands.
commands and/or keyword options are available. Refer to the Command Line Interface Reference for complete
information regarding all commands.
Enable pre-paid billing for the default subscriber by applying the following example configuration:
Enable pre-paid billing for the default subscriber of a domain alias by applying the following example configuration:
Notes:
You may add the optional keyword
to the
command to stop sending the final online access-request on termination of 3GPP2 prepaid sessions.
Optional commands: If both duration and volume attributes are received, default preference is given to the
duration attribute. To set the preference to the volume attribute, enter the following command:
Note that this command alone does not enable pre-paid support. The
command must be executed as shown to enable pre-paid support.
If you are using duration-based quota usage accounting, use the following command to define what behavior
specifies the end of the billing duration. The default behavior is the duration quota algorithm set to current-
time.
specifies the end of the billing duration. The default behavior is the duration quota algorithm set to current-
time.