Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas

Página de 580
L2TP Access Concentrator   
▀  L2TP Session and Tunnel Capacities 
 
▄  Cisco ASR 5000 Series Enhanced Feature Configuration Guide 
OL-22983-01   
L2TP Session and Tunnel Capacities 
The system is capable of supporting L2TP tunnels for all subscriber sessions or on a session-by-session basis. 
Each L2TP tunnel can facilitate one or more subscriber sessions. The number of supported L2TP sessions and tunnels 
corresponds to the number of active Packet Accelerator Cards (PACs) or Packet Services Cards (PSCs) 
The following tables lists PDSN Simple IP tunnel and session capacities for the ST16 and ASR 5000 respectively. 
Important:
  The capacities stated in this section are the maximum supported by the components. Actual capacities 
are dependent upon hardware and software configurations. 
Table 21.  L2TP LAC Tunnel and Session Capacity per ST16 for PDSN Simple IP 
 
Capacity/PAC
 
Capacity/Full System1
 
Minimum # of LAC services Required2
 
Tunnels 
32,000 
32,000 
Sessions 
40,000 
500,000 
Transactions/Second 
4003 
40004 
N/A 
1. A full system consists of 13 active PACs. 
2. Multiple LAC services can be configured to reduce the amount of traffic over a single interface. 
3. Transactions include PPP and LAC 
4. Transactions include PPP and LAC session setup assuming that a tunnel already exists. 
 
Table 22.  L2TP LAC Tunnel and Session Capacity per ASR 5000 for PDSN Simple IP 
 
Capacity/PSC
 
Capacity/Full System1
 
Minimum # of LAC services Required2
 
Tunnels 
32,000 
32,000 
Sessions 
120,000 
1,500,000 
Transactions/Second 
8003 
10,0004 
N/A 
1. A full system consists of 13 active PSCs. 
2. Multiple LAC services can be configured to reduce the amount of traffic over a single interface. 
3. Transactions include PPP and LAC 
4. Transactions include PPP and LAC session setup assuming that a tunnel already exists. 
 
The following table lists HA tunnel and session capacities for the ST16 and ASR 5000 respectively.