Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas
MME Service Configuration Procedures
▀ Information Required to Configure the System as an MME
▄ Cisco ASR 5000 Series Mobility Management Entity Administration Guide
62
OL-22987-01
Required Information
Description
eGTP service Name
An identification string from 1 to 63 characters (alpha and/or numeric) by which the eGTP service can be
associated with MME system. It is configured in Context configuration mode.
associated with MME system. It is configured in Context configuration mode.
Multiple names are needed if multiple eGTP services will be used.
MME-HSS service
Name
Name
An identification string from 1 to 63 characters (alpha and/or numeric) by which the MME-HSS service
can be associated with MME system. It is configured in Context configuration mode.
can be associated with MME system. It is configured in Context configuration mode.
Multiple names are needed if multiple MME-HSS services will be used.
APN name
The name for a pre-configured APN template, configured on system to associate with this MME service to
access PDN.
access PDN.
Maximum EPS
bearers per
subscriber
bearers per
subscriber
The maximum number of EPS bearers that a subscriber may simultaneously use to access PDNs through an
MME service.
MME service.
Maximum EPS
PDNs per subscriber
PDNs per subscriber
The maximum number of PDNs that a subscriber can access simultaneously through an MME service.
Required eGTP Context Configuration Information
The following table lists the information that is required to configure the eGTP context on a an MME.
Table 3. Required Information for eGTP Context Configuration
Required Information
Description
eGTP context name
An identification string from 1 to 79 characters (alpha and/or numeric) by which the eGTP context is
recognized by the system.
recognized by the system.
Generally it is identified as destination context.
eGTP Service name
An identification string from 1 to 79 characters (alpha and/or numeric) by which the eGTP service is
recognized by the system.
recognized by the system.
This service configured in Context configuration mode.
S11 Interface Configuration (To/from S-GW)
Type of eGTP
interface
interface
Type of eGTP interface required to connect to S-GW and MME.This is of MME type interface.
GTP-C bind address
IPv4 addresses assigned to the S11 interface.
Multiple addresses and subnets are needed if multiple S11 interfaces will be configured.
Required AAA Context Configuration Information
The following table lists the information that is required to configure the AAA (MME-HSS) context on an MME.