Cisco Cisco Packet Data Interworking Function (PDIF) Guia De Resolução De Problemas
Cisco ASR 5000 Series Statistics and Counters Reference ▄
OL-22990-02
Chapter 75
show hardware card
Table 212.
show hardware card
Command Output Descriptions
Field
Applicable Card(s)
Description
Card Type
All
The type of card installed.
Card Description
All
Displays the description assigned to the card during software
configuration.
configuration.
Part Number
All
The card‘s part number.
Cards of the same type and revision will have the same part number.
Cards of the same type and revision will have the same part number.
Serial Number
All
The card‘s serial number.
Switch Fabric
Modes
Modes
SPC/SMC, Processing Cards
Which Switch Fabric modes the card can do.
Possible values are:
Possible values are:
control plane
switch fabric
MAC Addresses
SMC, SPIO, and line cards
The media access control addresses supported by the interfaces on the
cards.
cards.
Card
Programmables
Programmables
All
This field indicates if the software on any of the programmable
components on the card is not at the current revision.
components on the card is not at the current revision.
If all software is current, Up To Date is displayed.
If one or more components do not have the most current
software, Out of Date is displayed, along with the
component(s) requiring the newer code.
software, Out of Date is displayed, along with the
component(s) requiring the newer code.
If one or more components have experimental or unreleased
software, Experimental/Unreleased is displayed.
software, Experimental/Unreleased is displayed.
NPU Microcode
Processing Cards
The version of the software running (currently operational) on the
Network Processing Unit (NPU).
Network Processing Unit (NPU).
Slave SCB
Processing Cards, SPIO, RCC,
and line cards
and line cards
The firmware version of the component that allows non-SPC/SMC
cards to communicate with the SPC/SMC over the system control bus
(SCB).
on-card: Indicates the version of the firmware that is on the boot flash
for the component.
cards to communicate with the SPC/SMC over the system control bus
(SCB).
on-card: Indicates the version of the firmware that is on the boot flash
for the component.
SPC CPLD
SPC
The version number of one of the Complex Programmable Logic
Devices (CPLD)s that allow the SPC to communicate with PACs.
Devices (CPLD)s that allow the SPC to communicate with PACs.