Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas
Network Address Translation Thresholds
▀ Configuring NAT Thresholds
▄ Cisco ASR 5000 Series Thresholding Configuration Guide
OL-22966-01
Configuring NAT Thresholds
This section describes how to enable and configure NAT thresholds.
Enabling Thresholds
To enable thresholds use the following configuration:
Notes:
The
command is required only if you are configuring
IP pool thresholds. It is not required if you are only configuring NAT port-chunks usage threshold or many-to-one NAT.
Configuring Threshold Poll Interval
To configure threshold poll interval use the following configuration:
Notes:
The
command is only applicable to many-to-one
NAT.
Configuring Thresholds Limits
To configure threshold limits use the following configuration: