Cisco Cisco Aironet 1310 Access Point Bridge
2
Release Notes for Cisco Aironet 1300 Series Outdoor Access Point/Bridge for Cisco IOS Release 12.3(4)JA2
OL-8216-01
Introduction
Introduction
The Cisco Aironet 1300 Series Outdoor Access Point/Bridge is an 802.11b/g device that provides high
speed and cost-effective wireless connectivity between multiple fixed or mobile networks and clients.
The flexibility of the device allows it to operate as an access point, wireless bridge, or workgroup bridge.
Building a metropolitan area wireless infrastructure with the access point/bridge provides deployment
personnel with a flexible, easy to use solution that meets the security requirements of wide area
networking professionals.
speed and cost-effective wireless connectivity between multiple fixed or mobile networks and clients.
The flexibility of the device allows it to operate as an access point, wireless bridge, or workgroup bridge.
Building a metropolitan area wireless infrastructure with the access point/bridge provides deployment
personnel with a flexible, easy to use solution that meets the security requirements of wide area
networking professionals.
The access point/bridge supports the 802.11b/g standard, providing 54-Mbps data rates with a proven,
secure technology. Cisco makes the maintenance and installation of the access point/bridge easy by
integrating it with your wired network using the Cisco unified wirelesss network solution. Based on the
Cisco IOS software, the access point/bridge includes advanced features such as Fast Secure Roaming,
QoS, and VLANs.
secure technology. Cisco makes the maintenance and installation of the access point/bridge easy by
integrating it with your wired network using the Cisco unified wirelesss network solution. Based on the
Cisco IOS software, the access point/bridge includes advanced features such as Fast Secure Roaming,
QoS, and VLANs.
System Requirements
You can install Cisco IOS Release 12.3(4)JA2 on any 1300 series outdoor access point/bridge.
Finding the IOS Software Version
To determine the version of IOS running on your access point/bridge, use a Telnet session to log into the
access point/bridge and enter the show version EXEC command. This example shows command output
from an access point/bridge running Cisco IOS Release 12.2(15)JA:
access point/bridge and enter the show version EXEC command. This example shows command output
from an access point/bridge running Cisco IOS Release 12.2(15)JA:
ap> show version
Cisco Internetwork Operating System Software
IOS (tm) C1310 Software (C1310-K9W7-M), Version 12.2(15)JA
Copyright (c) 1986-2004 by Cisco Systems, Inc.
You can also find the software version on the System Software Version page in the device’s web-browser
interface. The software version appears at the top left of most pages in the web-browser interface.
interface. The software version appears at the top left of most pages in the web-browser interface.
Upgrading to a New Software Release
To install access point software, follow these steps:
Step 1
Follow this link to the Cisco home page:
Step 2
Click Technical Support and Documentation. The Technical Support and Documentation page
appears.
appears.
Step 3
Click Documentation.
Step 4
Click Wireless. The Wireless Support Resources page appears.
Step 5
Scroll down to the Wireless LAN Access section.
Step 6
Select the access point model for which you need the information. The Introduction page for the model
you selected appears.
you selected appears.
Step 7
Under the Configure section, click Configuration Guides. A list of configuration documents appears.