Cisco Cisco Aironet 340 Access Point-RP-TNC Guia De Resolução De Problemas

If the client fails at this point to associate with the Base Station, you must reset the Base Station to its default
settings. Refer to Setting Defaults with the Reset Button.

The reset button is in a small hole on the back panel of the Base Station and is used to reset the Base Station
parameters to the default values.

To activate the reset button, complete these steps:

Insert a straightened paper clip into the small hole and press.

1. 

Remove the paper clip.

2. 

The Status LED blinks amber to show the Base Station has these default parameter values:

Radio Network Name

WEP Encryption Key

Network Type

Data Rate

Encryption

Authentication Type

Encryption

Association

3.