Philips 1180X/42 1180X/40 Manual Do Utilizador

Códigos do produto
1180X/40
Página de 20
ENGLISH
 
The razor will stay in one position until the 
end of the drying program. 
 
◗ 
Do not press the ON/OFF button while the 
cleaning cycle is running.  If this does occur, the 
cleaning cycle will stop and the razor holder 
will automatically move to the starting  
position. The cleaning cycle can be re-started 
by pressing the ON/OFF button once. 
 
  If the power plug is disconnected before the 
  
cleaning cycle is complete, the razor holder will  
remain in its current position.  Reconnect the   
plug into the outlet or Jet Clean System and the
razor holder will automatically move to the   
highest position.  The cleaning cycle can be  
re-started by pressing the ON/OFF button 
once.
  
C   
NOTE: If the cleaning solution level drops below 
the minimum level during the cleaning cycle, the 
‘cleaning chamber empty’ symbol will blink and 
razor holder returns the razor to the starting 
position, stopping the cleaning cycle. Unplug Jet 
Clean System from the outlet, remove razor and 
refill canister (see “Preparing Jet Clean System 
for Use”).
 
 
8
   When the entire cleaning cycle is complete 
and the razor is hygienically clean, the 
razor will be raised to the starting position 
and the display on the razor will turn on 
indicating that the razor is (re)charging. 
 
 
30
ENGLISH
C
  
9
  Pull the razor forward and lift razor from 
Jet Clean System.
 
  If the razor needs to be recharged, you can 
  
simply leave it in the Jet Clean System after   
cleaning and the razor will automatically  
recharge. The display on the razor will indicate 
the razor is recharging.
 
  You may store your razor in the Jet Clean 
System. Unplug from the outlet when 
charging/cleaning is complete.
Extra-thorough cleaning method
  
Do not mix up the cutters and combs as the   
  
shaving performance may be adversely affected  
  
for several weeks before optimal shaving  
  
performance is restored. 
 
1
  Turn razor OFF.
C
 
2
  Pull the shaving head holder off the 
bottom part of the shaving unit.  
 
 
C
 
3
  Slide the green retaining frame in the 
direction of the arrows indicated on the 
retaining frame.  
 
 
31