Cisco Cisco Identity Services Engine 2.1 Manual Técnico
Contents
Introduction
Prerequisites
Requirements
Components Used
Background Information
EasyConnect feature information
EasyConnect process flow
EasyConnect feature limitations
Configure
Configure Active Directory
Configure ISE
Join ISE 2.1 to Active Directory
Configure EasyConnect
Configure identity mapping
Configure switch
Verify
Switch
Identity Services Engine
MS Active Directory
Troubleshoot
Debugs on ISE
Typical Issues
Issue 1. Active directory is not showing Event 4768
Issue 2. Cannot connect to AD from Identity Mapping
Issue 3. Secure Access rule is not triggered
Introduction
This document describes how to configure EasyConnect Authentication with Identity Service
Engine (ISE) 2.1. ISE uses Microsoft Active Directory (AD) as an external identity store to store
resources such as users, machines, groups and attributes.
Engine (ISE) 2.1. ISE uses Microsoft Active Directory (AD) as an external identity store to store
resources such as users, machines, groups and attributes.
Prerequisites
Requirements
This document assumes that there is full ip connectivity between Switch, AD, ISE and Windows 7
Workstation. ISE Server is bootstrapped.
Workstation. ISE Server is bootstrapped.
Components Used
The information in this document is based on these software and hardware versions: