Cisco Cisco Identity Services Engine 2.1 Manual Técnico
Contents
Introduction
Prerequisites
Requirements
Components Used
Background Information
Configure
Network Diagram
Configure the WLC
Configure ISE
Step 1. Add Network Access Device
Step 2. Enable Radius and AD Probes
Step 3. Configure Custom Profiling Conditions
Step 4. Configure custom Profiling Policy
Step 5. Join ISE to AD
Step 6. Configure Authorization Policies
Verify
Troubleshoot
Debugs on ISE
Related Information
Introduction
This document describes how to configure Identity Services Engine (ISE) 2.1 Profiling Services
based on Active Directory (AD) Probe. Device sensor is a feature of access devices. It collects
information about connected endpoints.
based on Active Directory (AD) Probe. Device sensor is a feature of access devices. It collects
information about connected endpoints.
Prerequisites
Requirements
Cisco recommends that you have knowledge of these topics:
Radius protocol
●
AD
●
Cisco ISE
●
Components Used
The information in this document is based on these software and hardware versions:
Cisco ISE Version 2.1
●
Wireless LAN Controller (WLC) 8.0.133.0
●
Windows 7 Service Pack 1
●