Cisco Cisco AP541N Wireless Access Point Guia Da Instalação
Cisco AP541N Dual-band Single-radio Access Point Quick Start Guide
7
To configure the access point by using CCA:
S
TEP
1
Connect the Ethernet port on the access point to a switch port on a
SBCS device and power on the Cisco AP541N.
SBCS device and power on the Cisco AP541N.
S
TEP
2
Connect a PC with CCA installed to any access switch port on the
UC520 or SR520.
UC520 or SR520.
S
TEP
3
Create a new CCA site by entering a name and the IP address of
the UC520 or SR520.
the UC520 or SR520.
S
TEP
4
Connect to the CCA site by using the appropriate login credentials.
S
TEP
5
Click Window > Topology View.
When you have connected to the CCA site and the devices have
been discovered, the Topology map includes the Cisco AP541N.
been discovered, the Topology map includes the Cisco AP541N.
N
OTE
Any non-SBCS devices connected to the switch are not shown
in the Topology map.
in the Topology map.
S
TEP
6
Right-click the access point to display the options: Configuration
Utility, Properties, and Annotation.
Utility, Properties, and Annotation.
S
TEP
7
Click Configuration Utility.
The Access Point Configuration Utility
displays in a new window.
195058
Internet
DHCP client