Cisco Cisco AP541N Wireless Access Point Manual De Manutenção
Wireless
Modifying Virtual Access Point Settings
75
Cisco AP 541N Dual-band Single-radio Access Point Quick Start Guide
4
NOTE
After you configure the security settings, you must click Apply to apply the changes
and to save the settings.
and to save the settings.
RADIUS Key
Enter the RADIUS key in the text box.
The RADIUS Key is the shared secret key for the global
RADIUS server. You can use up to 63 standard alphanumeric
and special characters. The key is case sensitive, and you
must configure the same key on the access point and on your
RADIUS server. The text you enter is displayed as "*"
characters to prevent others from seeing the RADIUS key as
you type.
RADIUS server. You can use up to 63 standard alphanumeric
and special characters. The key is case sensitive, and you
must configure the same key on the access point and on your
RADIUS server. The text you enter is displayed as "*"
characters to prevent others from seeing the RADIUS key as
you type.
RADIUS Key
1–3
1–3
Enter the RADIUS key associated with the configured backup
RADIUS servers. The server at RADIUS IP Address-1 uses
RADIUS Key-1, RADIUS IP Address-2 uses RADIUS Key-2,
and so forth.
RADIUS servers. The server at RADIUS IP Address-1 uses
RADIUS Key-1, RADIUS IP Address-2 uses RADIUS Key-2,
and so forth.
Enable RADIUS
Accounting
Accounting
Select this option to track and measure the resources a
particular user has consumed such as system time, amount
of data transmitted and received, and so forth.
particular user has consumed such as system time, amount
of data transmitted and received, and so forth.
If you enable RADIUS accounting, it is enabled for the
primary RADIUS server and all backup servers.
primary RADIUS server and all backup servers.
Broadcast Key
Refresh Rate
Refresh Rate
Enter a value to set the interval at which the broadcast
(group) key is refreshed for clients associated to this VAP.
(group) key is refreshed for clients associated to this VAP.
The valid range is 0–86400 seconds. A value of 0 indicates
that the broadcast key is not refreshed.
that the broadcast key is not refreshed.
Session Key
Refresh Rate
Refresh Rate
Enter a value to set the interval at which the access point will
refresh session (unicast) keys for each client associated to
the VAP.
refresh session (unicast) keys for each client associated to
the VAP.
The valid range is 0–86400 seconds. A value of 0 indicates
that the broadcast key is not refreshed.
that the broadcast key is not refreshed.
Table 16
WPA Enterprise Field Descriptions
Field
Description