Cisco Cisco Packet Data Gateway (PDG) Guia Do Administrador
VLANs
Creating VLAN Tags ▀
Cisco ASR 5000 System Administration Guide ▄
287
The number of RADIUS NAS-IP addresses that can be configured is limited by the number of loopback addresses that
can be configured.
can be configured.
APN Support – PDN Gateway (P-GW)
P-GW Access Point Name (APN) supports extensive parameter configuration flexibility for the APN. VLAN tagging
may be selected by the APN, but are configured in the P-GW independently from the APN.
may be selected by the APN, but are configured in the P-GW independently from the APN.
Creating VLAN Tags
Use the following example to create VLANs on a port and bind them to pre-existing interfaces. For information on
creating interfaces, refer to System Interface and Ports.
creating interfaces, refer to System Interface and Ports.
config
port ethernet slot/port
no shutdown
vlan vlan_tag_ID
no shutdown
bind interface interface_name context_name
end
Notes:
more information.
Repeat this procedure as needed to configure additional VLANs for the port.
Save your configuration as described in the Verifying and Saving Your Configuration chapter.