Cisco Cisco Packet Data Gateway (PDG) Guia Do Administrador

Página de 377
Engineering Rules   
▀  Context Rules 
 
 
▄  Cisco ASR 5000 System Administration Guide 
360 
   
Context Rules 
 
A maximum of 63 contexts may be configured per chassis. 
 
Interfaces per Context 
 
512 Ethernet+PPP+tunnel interfaces 
 
32 ipv6ip tunnel interfaces 
 
511 GRE tunnels (2,048 GRE tunnels per chassis) 
 
256 loopback interfaces 
 
IP Addresses and IP Address Pools 
 
Up to 2,000 IPv4 address pools can be configured within a single context (regardless of the number of 
packet processing cards) with a total system limit of 5,000 IPv4 address pools for all contexts. 
 
Prior to Release 15.0: Up to 32 IPv6 pools can be configured within a single context. 
 
For Release 15.0 and higher: Up to 256 IPv6 pools can be configured within a single context. 
 
There is also a limit of 4,000,000 pool addresses and 32,000,000 static addresses that can be configured 
per context. Therefore, the number of pools depends on how many addresses are being used and how 
they are subnetted. 
 
Each context supports up to 32,000,000 static IP pool addresses. You can configure a maximum total of 
96,000,000 static IP pool addresses per chassis. Each static IP pool can contain up to 500,000 
addresses. 
 
Each context supports up to 16,000,000 dynamic IP pool addresses. You can configure a maximum 
total of 32,000,000 dynamic IP pool addresses per chassis. Each dynamic IP pool can contain up to 
500,000 addresses. 
Important:
  Each address in the pool requires approximately 60 bytes of memory. The amount 
of memory required, however, depends on a number of factors such as the pool type, and hold-timer 
usage. Therefore, in order to conserve available memory, you may need to limit the number of pools 
depending on the number of addresses to be configured and the number of installed application cards. 
 
The maximum number of simultaneous subscriber sessions is controlled by the installed capacity license for the 
service(s) supported. 
 
The maximum number of static address resolution protocol (ARP) entries per context is 128. 
 
The maximum number of domains per context is 2,048. 
 
ASN-GW services configured within the same context cannot communicate with each other. 
 
Routes 
 
Up to 1,200 static routes per context (48,000 per chassis). 
 
6,000 pool routes per context (6,000 per chassis) 
 
5,000 pool explicit host routes per context (6,000 per chassis) 
 
64 route maps per context