Cisco Cisco Packet Data Gateway (PDG) Guia Do Administrador
Service Configuration Procedures
▀ WiMAX-3GPP2 Interworking at HA
▄ Cisco ASR 5x00 Home Agent Administration Guide
76
Step 2
Save your configuration to flash memory, an external memory device, and/or a network location using the Exec mode
command
command
save configuration
. For additional information on how to verify and save configuration files, refer to the
System Administration Guide and the Command Line Interface Reference.
Use the following example to create and configure 3GPP2 FA service:
configure
context <context_name>
fa-service <fa_service_name>
default mn-aaa-removal-indication
revocation negotiate-i-bit
end
Configuring Common HA Service
To configure common HA service:
Step 1
Configure common HA service as described in this section.
Step 2
Save your configuration to flash memory, an external memory device, and/or a network location using the Exec mode
command
command
save configuration
. For additional information on how to verify and save configuration files, refer to the
System Administration Guide and the Command Line Interface Reference.
Use the following example to configure common HA service:
configure
context <ha_context_name>
ha-service <ha_service_name>
authentication aaa-distributed-mip-keys required
wimax-3gpp2 interworking
authentication mn-aaa allow-noauth
revocation negotiate-i-bit
end