Cisco Cisco Packet Data Gateway (PDG) Folheto

Página de 4162
  show ppp 
show ppp full username  ▀   
 
Cisco ASR 5x00 Statistics and Counters Reference  ▄  
 
   
3769 
show ppp full username 
Table 452. 
show ppp full username
 Command Output Descriptions 
Field
 
Description
 
Username 
The subscriber’s username. 
Callid 
The subscriber’s call identification (callid) number. 
Msid 
The subscriber’s mobile station identification (MSID) number. 
LCP State 
Indicates whether or not the Link Control Protocol (LCP) was successfully negotiated (Opened). If 
not, Not Opened will be displayed. 
mtu 
The subscriber’s maximum transmission unit (MTU) size in octets. 
mru 
The subscriber’s maximum reception unit (MRU) size in octets. 
auth algorithm 
The protocol the subscriber used for authentication. Possible protocols are: 
 
CHAP: Challenge Handshake Authentication Protocol 
 
PAP: Password Authentication Protocol 
PFC (loc to rem): (rem to 
loc): 
The PPP PFC transmit and receive settings. 
(loc to rem): Specifies how Protocol field Compression is applied for PPP packets transmitted to the 
Peer. Possible values are: 
 
ignore 
 
apply 
 
reject 
(rem to loc): Specifies whether Protocol Field Compressed PPP packets can be received from the 
Peer. Possible values are: 
 
allow 
 
deny 
ACFC (loc to rem): (rem 
to loc): 
Information is displayed for both directions of the session (remote-to-local and local-to-remote). 
async map 
The PPP asynchronous control character mapping (a 32-bit map). Information is displayed for both 
directions of the session (remote-to-local and local-to-remote). 
IPCP State 
Indicates whether or not the Internet Protocol Control Protocol (IPCP) was successfully negotiated 
(Opened). If not, Not Opened will be displayed. 
IP Header comp 
Indicates whether or not Van Jacobsen (VJ) header compression or Robust Header Compression 
(ROHC) is being implemented for the subscriber’s session. If neither, none is displayed. 
Information is displayed for both directions of the session (remote-to-local and local-to-remote). 
Local Address 
The PPP local address for the subscriber session. 
Remote Address 
The IP address assigned to the subscriber’s mobile device for the duration of the session.