Cisco Cisco Packet Data Gateway (PDG) Folheto
show subscribers
show subscribers access-flows full ▀
Cisco ASR 5x00 Statistics and Counters Reference ▄
4021
Field
Description
Data Statistics
Displays the data statistics.
Packets
Displays the total number of packets.
Bytes
Displays the total number of bytes.
pkts dropped tp
Displays the number of packets dropped by the traffic policy.
pkts dropped access-ctrl
Displays the number of packets dropped by the access control.
Requested QoS
Displays the requested QoS.
Profile Ids
Displays the profile IDs for the requested QoS.
QOS Id
Displays the applicable QoS identifier.
Granted QoS
Displays the granted QoS.
Global-Service-Class-Name
Specifies the global service class name.
Service-Class-Name
Specifies the local service class name.
Schedule Type
Displays the schedule type configured for the requested QoS. This group contains relevant
parameters like, minimum reserved traffic rate, maximum latency allowed, polling interval,
traffic priority, sustained traffic rate, and maximum traffic burst.
parameters like, minimum reserved traffic rate, maximum latency allowed, polling interval,
traffic priority, sustained traffic rate, and maximum traffic burst.
Classifiers
Displays the service classifier parameters like type of traffic, priority, matching protocol,
source-destination IP address and ports, DSCP marking etc. It also shows the configured
permit criteria for flows.
source-destination IP address and ports, DSCP marking etc. It also shows the configured
permit criteria for flows.
Data Path(s)
Displays the available information of data path(s).
Peer Address
Indicates the IP address of the trusted peer ASN GWs for inter ASN GW handovers in this
service.
service.
BS ID
Indicates the Base station Id.
Tunnel Endpoint
Indicates the IP address of GRE tunnel endpoint.
Gre Key
Indicates the GRE key for this data tunnel.
Type
Type of GRE data tunnel. It may be R4 or R6.
State
Indicates the status of access flow. Possible states are:
- I: Initializing
- F: Flow Added
- A: Active
- P: Pending
- I: Initializing
- F: Flow Added
- A: Active
- P: Pending
RecdPkts
Indicates the total number of packets received.
SendPkts
Indicates the total number of packets sent.
Total access-flows matching
specified criteria
specified criteria
Displays the total number of matching access-flows.