Cisco Cisco Packet Data Gateway (PDG)
System Settings
Configuring ASR 5500 Link Aggregation ▀
ASR 5500 System Administration Guide, StarOS Release 16 ▄
71
Link Aggregation Status
To check the status of link aggregation, use the following commands:
show port table
show port info
slot/port
A single character is used to display LAG physical port status in the output of the show port table command. See the
table below.
table below.
Table 6. LAG Port Status
Display
Description
LA+
Port is actively used for distributing.
LA-
Port failed to negotiate LACP.
LA~ (tilde)
Port negotiated LACP but another peer was selected.
LA*
Port is (re)negotiating LACP.