Cisco Cisco Packet Data Gateway (PDG)
Congestion Control
▀ Configuring Congestion Control
▄ ASR 5000 System Administration Guide, StarOS Release 16
264
Disconnecting Subscribers Based on Call or Inactivity Time
During periods of heavy system load, it may be necessary to disconnect subscribers in order to maintain an acceptable
level of system performance. You can establish thresholds to select subscribers to disconnect based on the length of time
that a call has been connected or inactive.
level of system performance. You can establish thresholds to select subscribers to disconnect based on the length of time
that a call has been connected or inactive.
To enable overload disconnect for the currently selected subscriber, use the following configuration example:
configure
context <context_name>
subscriber name <subscriber_name>
default overload-disconnect threshold inactivity-time <dur_thresh>
default overload-disconnect threshold connect-time <dur_thresh>
end
To disable the overload disconnect feature for this subscriber, use the following configuration example:
configure
context <context_name>
subscriber <subscriber_name>
no overload-disconnect {[threshold inactivity-time] | [threshold connect-
time]}
time]}
end
Notes:
overload-disconnect is not supported for the Call Session Control Function (CSCF) service.