Cisco Cisco Packet Data Gateway (PDG)
radius accounting keepalive
This command configures the keepalive authentication parameters for the RADIUS accounting server.
Product
All
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > AAA Server Group Configuration
configure > context context_name > aaa group group_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-aaa-group)#
Syntax Description
radius accounting keepalive { calling-station-id id | consecutive-response consecutive_responses |
framed-ip-address ipv4/ipv6_address| interval seconds | retries number | timeout seconds | username
user_name }
default radius accounting keepalive { calling-station-id | consecutive-response | interval | retries | timeout
framed-ip-address ipv4/ipv6_address| interval seconds | retries number | timeout seconds | username
user_name }
default radius accounting keepalive { calling-station-id | consecutive-response | interval | retries | timeout
| username }
no radius accounting keepalive framed-ip-address
no
Removes the specified configuration.
default
Configures the default setting for the specified keyword.
calling-station-id id
Configures the Calling-Station-Id to be used for the keepalive authentication.
id must be an alphanumeric string of size 1 to 15 characters.
Default: 000000000000000
consecutive-response consecutive_responses
Configures the number of consecutive authentication response after which the server is marked as reachable.
consecutive_responses must be an integer from 1 through 10.
Default: 1
Command Line Interface Reference, Modes A - B, StarOS Release 19
64
AAA Server Group Configuration Mode Commands
radius accounting keepalive