Cisco Cisco Packet Data Gateway (PDG)
aal2-node
This command creates/configures AAL2 node configuration to defined AAL2 node properties for
IuCS-over-ATM function.
IuCS-over-ATM function.
Product
HNB-GW
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > ALCAP Service Configuration
configure > context context_name > alcap-service service_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-alcap-service-
service_name
)#
Syntax Description
aal2-node aal2_node_name
[
-noconfirm
]
no aal2-node aal2_ndoe_name
no
Removes the configured AAL2 node from ALCAP service configuration.
aal2_node_name
Identifies the name of the AAL2 node name to configure the AAL2 node parameters.
The aal2_node_name must be an alphanumerical string from 1 through 63 characters.
Usage Guidelines
Use this command to create/configure the AAL2 node configuration and switch to AAL2 Node Configuration
mode.
mode.
Entering this command results in the following prompt:
[context_name]hostname(config-aal2-node-aal2_node_name)#
A maximum of TBD AAL2 node can be configured in one ALCAP service.
The AAL2 Node configured here will be used to bind with ATM port in PVC Configuration sub-mode
of ATM Configuration mode for IuCS-over-ATM functionality.
of ATM Configuration mode for IuCS-over-ATM functionality.
Important
Command Line Interface Reference, Modes A - B, StarOS Release 19
1406
ALCAP Configuration Mode Commands
aal2-node