Cisco Cisco Packet Data Gateway (PDG)
location-reporting
Configure location change reporting via ULI IE per APN for an S4-SGSN.
Product
SGSN
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > APN Profile Configuration
configure > apn-profile profile_name
Entering the above command sequence results in the following prompt:
[local]
host_name
(apn-profile-
profile_name
)#
Syntax Description
location-reporting access-type { gprs | umts }
remove location-reporting access-type { gprs | umts }
remove location-reporting access-type { gprs | umts }
remove
Disables the location change reporting definition in the APN profile configuration.
access-type { gprs | umts }
Allows the operator to select location change reporting for the 2G and / or the 3G subscribers. Both access
types can be identified in a single command or the command can be issued twice. Either way, two separate
entries are created, one for each access type
types can be identified in a single command or the command can be issued twice. Either way, two separate
entries are created, one for each access type
Usage Guidelines
As with all APN profiles, to enable location change reporting, this APN profile must be associated with a call
control profile.
control profile.
Location change reporting for a Gn-SGSN is enabled with the location reporting command in the Call Control
Profile configuration mode. That command can be used to configure the location change reporting function
for the S4-SGSN, however that configuration would be over-ridden by an APN profile configuration. As well,
using this APN profile location reporting command gives the operator greater control to apply location
change reporting per APN.
Profile configuration mode. That command can be used to configure the location change reporting function
for the S4-SGSN, however that configuration would be over-ridden by an APN profile configuration. As well,
using this APN profile location reporting command gives the operator greater control to apply location
change reporting per APN.
Examples
Enable location change reporting for 2G subscribers:
location-reporting access-type gprs
Command Line Interface Reference, Modes A - B, StarOS Release 19
1473
APN Profile Configuration Mode
location-reporting