Cisco Cisco Packet Data Gateway (PDG)
authorize-with-hss
This command enables or disables subscriber session authorization per APN via a Home Subscriber Server
(HSS) over an S6b Diameter interface. This feature is required to support the interworking of GGSN with
P-GW and HA.
(HSS) over an S6b Diameter interface. This feature is required to support the interworking of GGSN with
P-GW and HA.
Product
P-GW
SAEGW
Privilege
Administrator
Command Modes
Exec > Global Configuration > Context Configuration > APN Configuration
configure > context context_name > apn apn_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-apn)#
Syntax Description
authorize-with-hss [ egtp [ s2b ] [ s5-s8 ] [ report-ipv6-addr ] | lma [ s6b-aaa-group aaa-group-name |
report-ipv6-addr ] | report-ipv6-addr ]
{ default | no } authorize-with-hss
report-ipv6-addr ] | report-ipv6-addr ]
{ default | no } authorize-with-hss
default | no
Disables the default authorization of subscriber over S6b interface. Resets the command to the default setting
of "authorize locally" from an internal APN authorization configuration.
of "authorize locally" from an internal APN authorization configuration.
egtp
Enables S6b authorization for eGTP only.
s2b
Enables S6b authorization for eGTP S2b.
s5-s8
Enables S6b authorization for eGTP S5S8.
lma [ s6b-aaa-group aaa-group-name ]
Enables S6b authorization for LMA only.
Command Line Interface Reference, Modes A - B, StarOS Release 19
1549
APN Configuration Mode Commands
authorize-with-hss