Cisco Cisco Packet Data Gateway (PDG)
ipv6 egress-address-filtering
Enables or disable IIPv6 egress address filtering. This function filters out packets not meant for the mobile
interface ID. The GGSN records the source interface ID of all the packets received from the mobile node.
When packets sent to the mobile node are received, the destination interface ID is compared against the list
of recorded interface IDs and with the local interface-ID assigned to the MS during IPv6CP. If no match is
found, the packet is dropped.
interface ID. The GGSN records the source interface ID of all the packets received from the mobile node.
When packets sent to the mobile node are received, the destination interface ID is compared against the list
of recorded interface IDs and with the local interface-ID assigned to the MS during IPv6CP. If no match is
found, the packet is dropped.
Product
GGSN
P-GW
SAEGW
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > APN Configuration
configure > context context_name > apn apn_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-apn)#
Syntax Description
[
no
]
ipv6 egress-address-filtering
no
Disables IPv6 egress address filtering.
Usage Guidelines
Used to filter packets that arrive from the internet to a particular site.
Examples
The following command provides an example disabling egress address filtering:
no ipv6 egress-address-filtering
no ipv6 egress-address-filtering
Command Line Interface Reference, Modes A - B, StarOS Release 19
1641
APN Configuration Mode Commands
ipv6 egress-address-filtering