Cisco Cisco Packet Data Gateway (PDG)
long-duration-action disconnection
Specifies what action is taken when the long duration timer expires.
Product
All
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > APN Configuration
configure > context context_name > apn apn_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-apn)#
Syntax Description
long-duration-action disconnection
[
suppress-notification
] [
dormant-only
] +
long-duration-action disconnection
Detects a long duration session and disconnects the session after sending SNMP TRAP and CORBA notification.
Default: Disabled
Default: Disabled
suppress-notifiaction
Suppress the SNMP TRAP and CORBA notification after detecting and disconnecting a long duration session.
Default: Disabled
Default: Disabled
dormant only
Disconnects the dormant sessions after long duration timer and inactivity time with idle time-out duration
expires. It sends the SNMP TRAP and CORBA notification after disconnecting a long duration session.
Default: Disabled
expires. It sends the SNMP TRAP and CORBA notification after disconnecting a long duration session.
Default: Disabled
Usage Guidelines
Use this command to determine what action is taken when a session exceeds the limit set by the long duration
timer.
timer.
Refer to the timeout idle and timeout long-duration command for information on setting the long duration
timer.
timer.
Examples
Use the following command to enable disconnecting sessions that exceed the long duration timer:
long-duration-action disconnection
long-duration-action disconnection
Command Line Interface Reference, Modes A - B, StarOS Release 19
1649
APN Configuration Mode Commands
long-duration-action disconnection