Cisco Cisco Packet Data Gateway (PDG)
threshold tx-utilization
Configures thresholds for transmit port utilization.
Product
HNB-GW
SGSN
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > ATM Port Configuration
configure > port atm slot_number/port_number
Entering the above command sequence results in the following prompt:
[local]
host_name
(config-port-
slot_number/port_number
)#
Syntax Description
threshold tx-utilization high_thresh [ clear low_thresh ]
default threshold tx-utilization
default threshold tx-utilization
default
Restores the port tx-thresholds to their system defaults of 80 percent.
high_thresh
Default: 80
The high threshold transmit port utilization percentage that must be met or exceeded within the polling interval
to generate an alert or alarm.
to generate an alert or alarm.
The percentage can be configured to any integer value between 0 and 100.
clear low_thresh
Allows the configuration of the low threshold.
Default: 80
The low threshold transmit port utilization percentage that maintains a previously generated alarm condition.
If the utilization percentage falls below the low threshold within the polling interval, a clear alarm will be
generated.
If the utilization percentage falls below the low threshold within the polling interval, a clear alarm will be
generated.
The percentage can be configured to any integer value between 0 and 100.
Command Line Interface Reference, Modes A - B, StarOS Release 19
1806
ATM Port Configuration Mode Commands
threshold tx-utilization