Cisco Cisco Packet Data Gateway (PDG)
BITS Port Configuration Mode Commands
The Building Integrated Timing Supply (BITS) port configuration mode allows you to configure an ASR
5000 SPIO equipped with an E1 or T1 BITS port. You can also configure line-timing whereby the SPIO
recovers timing from a port on an optical (OLC/OLC2) or channelized (CLC/CLC2) card.
5000 SPIO equipped with an E1 or T1 BITS port. You can also configure line-timing whereby the SPIO
recovers timing from a port on an optical (OLC/OLC2) or channelized (CLC/CLC2) card.
Command Modes
Exec > Global Configuration > BITS Port Configuration
configure > port bits slot_number/port_number
Entering the above command sequence results in the following prompt:
[local]
host_name
(config-port-
slot_number/port_number
)#
The commands or keywords/variables that are available are dependent on platform type, product version,
and installed license(s).
and installed license(s).
Important
•
•
•
•
•
•
•
•
•
Command Line Interface Reference, Modes A - B, StarOS Release 19
1903