Cisco Cisco Packet Data Gateway (PDG)
content-filtering processing server-group
This command allows you to enable/disable Category-based Content Filtering.
Product
CF
Privilege
Security Administrator, Administrator
Command Modes
Exec > ACS Configuration > Charging Action Configuration
active-charging service service_name > charging-action charging_action_name
Entering the above command sequence results in the following prompt:
[local]
host_name
(config-charging-action)#
Syntax Description
content-filtering processing server-group
{ default | no } content-filtering processing
{ default | no } content-filtering processing
default
Configures this command with its default setting.
Default: Content filtering configured for the rulebase is attempted
no
Specifies to bypass content filtering.
This configuration should only be specified for charging actions that are performed when known safe sites
are being accessed.
are being accessed.
Usage Guidelines
Use this command to enable or disable Category-based Content Filtering in the charging action.
This command works as second-level filter to process the HTTP/WAP GET request with Internet Content
Adaptation Protocol (ICAP) after ruledef matching. The first-level filtering is in the rulebase configuration.
This CLI command is only effective when the content-filtering mode server-group command is configured
in the rulebase.
Adaptation Protocol (ICAP) after ruledef matching. The first-level filtering is in the rulebase configuration.
This CLI command is only effective when the content-filtering mode server-group command is configured
in the rulebase.
Examples
The following command enables content filtering in the current charging action:
content-filtering processing server-group
content-filtering processing server-group
Command Line Interface Reference, Modes A - B, StarOS Release 19
311
ACS Charging Action Configuration Mode Commands
content-filtering processing server-group