Cisco Cisco Packet Data Gateway (PDG)
associate-service
Identifies services to be associated with the GPRS Service.
This command is used only in Releases 12.0 and 12.2. For Release 14.0 refer to the associate command.
Important
This command can be used before the associated service instance is created and configured but care should
be used to match the service names.
be used to match the service names.
Important
Product
SGSN
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > GPRS Service Configuration
configure > context context_name > gprs-service service_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-gprs-service)#
Syntax Description
[ no ] associate-service { gs name | map name | sgtp name } [ context ctxt_name ]
no
Removes the service association definition from the configuration.
gs name
Specifies the Gs service configuration to associate with this GPRS service.
name must be a string of 1 to 63 alphanumeric characters with no spaces.
map name
Specifies the MAP service configuration to associate with this GPRS service.
name must be a string of 1 to 63 alphanumeric characters with no spaces.
sgtp name
Specifies the SGTP service configuration to associate with this GPRS service.
Command Line Interface Reference, Modes G - H, StarOS Release 19
975
GPRS Service Configuration Mode Commands
associate-service