Cisco Cisco Packet Data Gateway (PDG)
sequence-number
Enables addition of the sequence number to every GTP-U packet. Default is disabled.
Product
GGSN
HSGW
P-GW
SAEGW
SGSN
S-GW
Privilege
Administrator
Command Modes
Exec > Global Configuration > Context Configuration > GTP-U Service Configuration
configure > context context_name > gtpu-service service_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-gtpu-service)#
Syntax Description
[ no ] sequence-number
no
Disables addition of the sequence number to every GTP-U packet.
Usage Guidelines
Use this command to enable/disable addition of the sequence number to every GTP-U packet coming from
Gi interface and going towards Gn/Gp interface. If GTP-U packets are received out of sequence, sequence
numbers would allow the packets to be reorded.
Gi interface and going towards Gn/Gp interface. If GTP-U packets are received out of sequence, sequence
numbers would allow the packets to be reorded.
Examples
The following command enables addition of the sequence number to every GTP-U packet:
sequence-number
sequence-number
Command Line Interface Reference, Modes G - H, StarOS Release 19
1218
GTP-U Service Configuration Mode Commands
sequence-number