Cisco Cisco Packet Data Gateway (PDG)
nas-node-selection
This command configures the selection of logical eNodeB/ MME based on TAI or Global eNodeB id.
Product
HeNB-GW
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > HeNBGW-Access Service Configuration
configure > context context_name > henbgw-access-service service_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-henbgw-access-service)#
Syntax Description
nas-node-selection { global-eNodeB-id-based | tai-based }
This command is functional for 8 logical eNodeBs only.
Important
global-eNodeB-id-based
Specifies the Global eNodeB id Based selection.
tai-based
Specifies the TAI based selection.This is the default option.
Usage Guidelines
Use this command to configure the selection of logical eNodeB/ MME based on TAI or Global eNodeB id.
Examples
Following command configures the selection of logical eNodeB/ MME based on Global eNodeB id.
nas-node-selection global-eNodeB-id-based
nas-node-selection global-eNodeB-id-based
Command Line Interface Reference, Modes G - H, StarOS Release 19
1329
HeNB-GW Access Service Configuration Mode Commands
nas-node-selection