Cisco Cisco Packet Data Gateway (PDG)
s1ap-retransmission-timeout
This command configures the timeout interval to support Node Level S1AP retransmissions if there in no
response received from the peer (MME).
response received from the peer (MME).
Product
HeNB-GW
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > HeNBGW-Network Service Configuration
configure > context context_name > henbgw-network-service service_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(
config-henbgw-network-service
)#
Syntax Description
s1ap-retransmission-timeout number_of_secs
default s1ap-retransmission-timeout
default s1ap-retransmission-timeout
default
Configures the default S1AP retransmission timeout for this HeNB-GW Network service configuration.
Default retransmission timeout is 60 seconds.
Default retransmission timeout is 60 seconds.
number_of_secs
Identifies the number seconds as the S1AP retransmission timeout to be configured. This number must be
entered as an integer between 1 and 600.
entered as an integer between 1 and 600.
Usage Guidelines
Use this command to configure the timeout interval to support Node Level S1ap retransmissions for this
HeNB-GW Network service.
HeNB-GW Network service.
Examples
Following command configures 100 as the S1AP retransmission timeout on a specific HeNB-GW Network
service.
s1ap-retransmission-timeout 100
service.
s1ap-retransmission-timeout 100
Command Line Interface Reference, Modes G - H, StarOS Release 19
1361
HeNB-GW Network Service Configuration Mode Commands
s1ap-retransmission-timeout