Cisco Cisco Packet Data Gateway (PDG)
rnc-id
Configures the Radio Network Concentrator (RNC) identifier in a Radio Network PLMN associated with
HNB-GW service. The RNC identifier is provided to the HNB during HNB-REGISTRATION.
HNB-GW service. The RNC identifier is provided to the HNB during HNB-REGISTRATION.
Product
HNB-GW
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > HNB-GW Service Configuration > HNB-RN PLMN
Configuration
Configuration
configure > context context_name > hnbgw-service service_name > radio-network-plmn mcc mcc_number
mnc mnc_number
mnc mnc_number
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-hnbgw-radio-plmn)#
Syntax Description
[ no ] rnc-id rnc_id
no
Deletes the RNC id from the system configuration.
rnc-id
Specifies the RNC identifier as an integer from 0 through 4095.
Usage Guidelines
Use this command to configure RNC id for Radio Network PLMN which will be sent to HNBs from HNB-GW
during HNB-REGISTRATION procedure. Depending upon the requirement the RNC Identifier can be provided
at the desired granularity.
during HNB-REGISTRATION procedure. Depending upon the requirement the RNC Identifier can be provided
at the desired granularity.
Examples
The following command configures the HNB-GW service to return an RNC identifier as 102 when an
HNB-REGISTRATION request is received:
global rnc-id 102
HNB-REGISTRATION request is received:
global rnc-id 102
Command Line Interface Reference, Modes G - H, StarOS Release 19
1530
HNB-RN PLMN Configuration Mode Commands
rnc-id