Cisco Cisco Packet Data Gateway (PDG)

Página de 1630
diameter update-dictionary-avps
Specifies which release of 3GPP TS 29.272 is to be used for the HSS peer service.
Product
MME
SGSN
Privilege
Administrator
Command Modes
Exec > Global Configuration > Context Configuration > HSS Peer Service Configuration
configure > context context_name > hss-peer-service service_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-hss-peer-service)#
Syntax Description
diameter update-dictionary-avps { 3gpp-r10 | 3gpp-r11 | 3gpp-r9 }
no diameter update-dictionary-avps
no
Sets the command to the default value where Release 8 ('standard') dictionary is used for backward compatibility
of previous releases.
3gpp-r10
Configures the MME /SGSN to signal additional AVPs to HSS in support of Release 10 of 3GPP 29.272.
3gpp-r11
Configures the MME /SGSN to signal additional AVPs to HSS in support of Release 11 of 3GPP 29.272.
Using this keyword is necessary to enable the MME to fully support inclusion of the Additional Mobile Station
ISDN (A-MSISDN) flag of the Feature List AVP in Update Location Request (ULR) messages sent over the
S6a interface to the HSS at the time a UE Attaches. For more information about supporting A-MSISDN, refer
to the information for the a-msisdn command in the Call-Control Profile configuration mode.
3gpp-r9
Configures the MME/SGSN to signal Release 9 AVPs to HSS.
Usage Guidelines
Use this command to configure the 3GPP release that should be supported for this HSS peer service.
Command Line Interface Reference, Modes G - H, StarOS Release 19    
1589
HSS Peer Service Configuration Mode Commands
diameter update-dictionary-avps