Cisco Cisco Packet Data Gateway (PDG)
port rs232
Enters the RS-232 Port Configuration mode for the RS-232 console port on the specified SPIO card. Not
available on the XT2 platform.
available on the XT2 platform.
Product
All
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]
host_name
(config)#
Syntax Description
port rs232 slot 3
rs232
Indicates the port identified is an RS-232 port on a SPIO card.
slot 3
Specifies the slot of the SPIO for which RS-232 Port Configuration mode is being entered. The slot must refer
to an installed SPIO card. The specified port must always be 3 for an RS-232 port.
to an installed SPIO card. The specified port must always be 3 for an RS-232 port.
The value for slot must be either 24 or 25.
Usage Guidelines
Change the current configuration mode to RS-232 Port Configuration mode.
Examples
The following command enters the RS-232 Port Configuration mode for the SPIO in slot 24;
port rs232 24 3
port rs232 24 3
Command Line Interface Reference, Modes G - H, StarOS Release 19
313
Global Configuration Mode Commands (L-S)
port rs232