Cisco Cisco Packet Data Gateway (PDG)

Página de 1630
snmp heartbeat
Enables the sending of periodic "heartbeat" notifications (traps).
Product
All
Privilege
Administrator
Command Modes
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]
host_name
(config)#
Syntax Description
snmp heartbeat { interval minutes | second-interval seconds }
[ default | no ] snmp heartbeat
default
Resets the SNMP heartbeat to 60 minutes.
no
Disables the feature.
interval minutes
Specifies the interval time in minutes between notificationsas an integer from 1 through 1440. Default: 60
second-interval seconds
Default: 30
Specifies the interval time in seconds between notificationsas an integer from 10 through 50.
Usage Guidelines
Use this command to enable the sending of a heartbeat notification periodically to confirm a system is up and
communicating.
Examples
The following command sets the SNMP heartbeat notification interval to 2 hours, 15 minutes.
snmp heartbeat interval 135
   Command Line Interface Reference, Modes G - H, StarOS Release 19
372
Global Configuration Mode Commands (L-S)
snmp heartbeat