Cisco Cisco Packet Data Gateway (PDG)

threshold npu-utilization

Configures alarm or alert thresholds for the percentage of network processing unit (NPU) utilization.

Product

All

Privilege

Security Administrator, Administrator

Command Modes

Exec > Global Configuration

configure

Entering the above command sequence results in the following prompt:

[local]

host_name

(config)#

Syntax Description

threshold npu-utilization high_thresh clear low_thresh

default

Configures this command with the default threshold settings.

Default: 0—disabled

high_thresh

Specifies the high percentage threshold for NPU utilization that must be met or exceeded within the polling
interval to generate an alert or alarm.

high_thresh must be an integer from 0 through 100. A value of 0 disables the threshold.

Default: 0

clear low_thresh

Specifies the low percentage threshold for NPU utilization that must be met within the polling interval for a
clear alarm to be generated.

low_thresh must be an integer from 0 through 100. A value of 0 disables the threshold. If not set, the high_thresh
will be the high and low threshold setting.

Default: 0

Usage Guidelines

Use this command to configure the NPU utilization threshold settings.

Command Line Interface Reference, Modes G - H, StarOS Release 19

556

Global Configuration Mode Commands (T-threshold phspc)

threshold npu-utilization