Cisco Cisco Packet Data Gateway (PDG)
threshold per-service-asngw-sessions
Configures alarm or alert thresholds for the number of sessions per ASN-GW service in the system.
Product
ASN-GW
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]
host_name
(config)#
Syntax Description
threshold per-service-asngw-sessions high_thresh [ clear low_thresh ]
high_thresh
Default: 0
Specifies the high threshold number of PDP contexts for any one ASN-GW service that must be met or
exceeded within the polling interval to generate an alert or alarm.
exceeded within the polling interval to generate an alert or alarm.
high_thresh is an integer from 0 through 2500000. A value of 0 disables the threshold.
clear low_thresh
Default: 0
Specifies the low threshold number of PDP contexts for any one ASN-GW service that maintains a previously
generated alarm condition. If the number of sessions falls beneath the low threshold within the polling interval,
a clear alarm will be generated.
generated alarm condition. If the number of sessions falls beneath the low threshold within the polling interval,
a clear alarm will be generated.
low_thresh is an integer from 0 through 2500000. A value of 0 disables the threshold.
This value is ignored for the Alert model. In addition, if this value is not configured for the Alarm model,
the system assumes it is identical to the high threshold.
the system assumes it is identical to the high threshold.
Important
Usage Guidelines
Monitor and set alarms or alerts when the number of PDP contexts for any ASN-GW service in the system
is equal to or greater than the set limit.
is equal to or greater than the set limit.
Command Line Interface Reference, Modes G - H, StarOS Release 19
566
Global Configuration Mode Commands (T-threshold phspc)
threshold per-service-asngw-sessions