Cisco Cisco Packet Data Gateway (PDG)
ipsec
Configures parameters for the 3GPP/3GPP2 P-CSCF security associations within this crypto template.
Product
SCM
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > CSCF Crypto Template Configuration
configure > context context_name > crypto template template_name ipsec-3gpp-cscf
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(cfg-crypto-tmpl-ims-cscf-tunnel)#
Syntax Description
ipsec transform-set list list_name
transform-set list name
transform-set: Specifies a context-level IPSec security association transform set to be used for deriving
3GPP/3GPP2 P-CSCF security associations from this crypto template.
3GPP/3GPP2 P-CSCF security associations from this crypto template.
list list_name: A space separated list of 3GPP/3GPP2 P-CSCF security association transform sets. list_name
must be an existing 3GPP/3GPP2 P-CSCF transform set and be from 1 to 127 alpha and/or numeric characters.
must be an existing 3GPP/3GPP2 P-CSCF transform set and be from 1 to 127 alpha and/or numeric characters.
A minimum of one transform set is required. A maximum of four transform sets may be specified.
Important
Usage Guidelines
Use this command to configure parameters for the 3GPP/3GPP2 P-CSCF security associations within this
crypto template.
crypto template.
Examples
The following command configures the 3GPP/3GPP2 P-CSCF transform set list name to ikev1list1:
ipsec transform-set list ikev1list1
ipsec transform-set list ikev1list1
Command Line Interface Reference, Modes C - D, StarOS Release 19
1344
CSCF Crypto Template Configuration Mode Commands
ipsec