Cisco Cisco Packet Data Gateway (PDG)
gtpp
Enables secondary GTPP accounting for an S-GW call control profile. By default, secondary GTPP accounting
is disabled.
is disabled.
Product
S-GW
SAEGW
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Call Control Profile Configuration
configure > call-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]
host_name
(config-call-control-profile-
profile_name
)#
Syntax Description
gtpp secondary-group group_name [ accounting context ctx_name ]
no gtpp secondary-group
no gtpp secondary-group
no
Disables secondary GTPP accounting.
secondary-group group_name
Enables secondary GTPP accounting and specifies a GTPP group name.
group_name must be an alphanumeric string of 1 through 63 characters.
accounting context ctx_name
Specifies the specific accounting context to be used for secondary GTPP accounting. If this keyword is omitted,
source context will be used for secondary GTPP accounting.
source context will be used for secondary GTPP accounting.
ctx_name must be an alphanumeric string of 1 through 79 characters.
Usage Guidelines
Use this command to enable or disable secondary GTPP accounting for an S-GW call control profile.
Examples
The following command enables secondary GTPP accounting for an S-GW call control profile and specifies
a GTPP group named gtpp-grp1:
gtpp secondary-group gtpp-grp1
a GTPP group named gtpp-grp1:
gtpp secondary-group gtpp-grp1
Command Line Interface Reference, Modes C - D, StarOS Release 19
99
Call Control Profile Configuration Mode
gtpp