Cisco Cisco Packet Data Gateway (PDG)
21: unassigned
14: MPA
7: LPC
0: PCMU
22: unassigned
15: G728
8: PCMA
1: reserved
23: unassigned
16: DVI4
9: G722
2: reserved
17: DVI4
10: L16
3: GSM
18: G729
11: L16
4: G723
19: reserved
12: QCELP
5: DVI4
20: unassigned
13: CN
6: DVI4
video payload_type: Specifies the video or audio-video codec added to the allowed codecs list. payload_type
must be an integer from 0 to 95. Default value is 5.
must be an integer from 0 to 95. Default value is 5.
Valid static video codecs:
72-76: reserved
32: MPV
28: nv
24: unassigned
77-95: unassigned
33: MP2T
29: unassigned
25: CelB
34: H263
30: unassigned
26: JPEG
35-71: unassigned
31: H261
27: unassigned
Usage Guidelines
Use this commands to create a list of supported static audio and video codecs in the system. When a request
is received by the CSCF, the SDP fields in the message are checked to determine the codec being used. The
codec in the SDP fields must match a codec in the allowed codec list or the CSCF rejects the request.
is received by the CSCF, the SDP fields in the message are checked to determine the codec being used. The
codec in the SDP fields must match a codec in the allowed codec list or the CSCF rejects the request.
Examples
The following command adds the G729 audio codec to the allowed codecs list:
static-codec 18
static-codec 18
Command Line Interface Reference, Modes C - D, StarOS Release 19
1369
CSCF Enforce Codec Policy Configuration Mode Commands
static-codec