Cisco Cisco Packet Data Gateway (PDG)
authorization policy-interworking-failure
Allows/rejects a session based on configuration in case of failure from PCRF.
Product
SCM (P-CSCF, A-BG)
Privilege
Administrator
Command Modes
Exec > Global Configuration > Context Configuration > Context Configuration > CSCF Service Configuration
> Proxy-CSCF Configuration > CSCF PCRF-Policy-Control Configuration
> Proxy-CSCF Configuration > CSCF PCRF-Policy-Control Configuration
configure > context context_name > cscf service service_name > proxy-cscf > pcrf-policy-control
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-pcrf-policy-control)#
Syntax Description
authorization policy-interworking-failure { session-continue | session-reject [ response-code code ] )
default authorization policy-interworking-failure
default authorization policy-interworking-failure
session-continue
P-CSCF continues session in case of failure from PCRF.
session-reject
P-CSCF rejects session in case of failure from PCRF.
response-code code
Specifies SIP response code for rejected session.
number must be an integer from 400 to 699. Default is 500.
default
By default, session-reject is activated to reject session with default response code 500.
Usage Guidelines
Use this command to configure for policy interworking failure. Allow or reject a session based on configuration
in case of failure from PCRF.
in case of failure from PCRF.
Examples
The following command rejects session in case of failure from PCRF with SIP response code 450:
authorization policy-interworking-failure session-reject response-code 450
authorization policy-interworking-failure session-reject response-code 450
Command Line Interface Reference, Modes C - D, StarOS Release 19
1405
CSCF PCRF-Policy-Control Configuration Mode Commands
authorization policy-interworking-failure