Cisco Cisco Packet Data Gateway (PDG)
serving-cscf
Enables Serving-CSCF for the service and enters the Serving-CSCF Command Mode. Default is disabled.
Product
SCM (S-CSCF)
Privilege
Administrator
Command Modes
Exec > Global Configuration > Context Configuration > CSCF Service Configuration
configure > context context_name > cscf service service_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-cscf-service)#
Syntax Description
[ no ] serving-cscf
no
Disables S-CSCF for the service.
Usage Guidelines
Use this command to enable the Serving-CSCF feature and enter the Serving-CSCF Configuration Mode.
Entering this command results in the following prompt:
[
context_name
]
hostname
(config-cscf-service-serving-cscf)#
Serving-CSCF Configuration Mode commands are defined in the CSCF Serving-CSCF Configuration Mode
Commands chapter in this guide.
Commands chapter in this guide.
The Serving-CSCF is a license-enabled function of the Session Control Manager. Only one function
(P-CSCF, S-CSCF, E-CSCF, SIP Proxy, or A-BG) can be enabled per service.
(P-CSCF, S-CSCF, E-CSCF, SIP Proxy, or A-BG) can be enabled per service.
Important
Command Line Interface Reference, Modes C - D, StarOS Release 19
1573
CSCF Service Configuration Mode Commands
serving-cscf