Cisco Cisco Packet Data Gateway (PDG)
lte-zone-code
Configures the enforcement of allowed or restricted zone code lists and associates an EPS Mobility Management
(EMM) cause code to rejected attach attempts.
(EMM) cause code to rejected attach attempts.
Product
MME
Privilege
Administrator
Command Modes
Exec > Global Configuration > Call Control Profile Configuration
configure > call-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]
host_name
(config-call-control-profile-
profile_name
)#
Syntax Description
lte-zone-code [ allow | restrict } { emm-cause-code { eps-service-not-allowed-in-this-plmn |
no-suitable-cell-in-tracking-area | plmn-not-allowed | roaming-not-allowed-in-this-tracking-area |
tracking-area-not-allowed ] zone-code-list zc_id +
remove lte-zone-code zone-code-list
no-suitable-cell-in-tracking-area | plmn-not-allowed | roaming-not-allowed-in-this-tracking-area |
tracking-area-not-allowed ] zone-code-list zc_id +
remove lte-zone-code zone-code-list
remove
Removes the zone code list from the call control profile.
[ allow | restrict ]
Specifies whether the zone code list is allowed or restricted.
You can only create an allowed or restricted list, not both.
Important
emm-cause-code [ eps-service-not-allowed-in-this-plmn | no-suitable-cell-in-tracking-area |
plmn-not-allowed | roaming-not-allowed-in-this-tracking-area | tracking-area-not-allowed ]
plmn-not-allowed | roaming-not-allowed-in-this-tracking-area | tracking-area-not-allowed ]
Optionally, specify one of the following EMM cause codes to apply when a UE request is rejected:
eps-service-not-allowed-in-this-plmn
no-suitable-cell-in-tracking-area
plmn-not-allowed
roaming-not-allowed-in-this-tracking-area
Command Line Interface Reference, Modes C - D, StarOS Release 19
159
Call Control Profile Configuration Mode
lte-zone-code