Cisco Cisco Packet Data Gateway (PDG)
regional-subscription-restriction
Allows the operator to define the cause code for subscriber rejection when it is due to regional subscription
information failure.
information failure.
Product
SGSN
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Call Control Profile Configuration
configure > call-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]
host_name
(config-call-control-profile-
profile_name
)#
Syntax Description
[ remove ] regional-subscription-restriction [ failure-code code | user-device-release { before-r99
failure-code code | r99-or-later failure-code code } ]
failure-code code | r99-or-later failure-code code } ]
remove
This keyword causes the configuration to be deleted from the call control profile configuration.
failure-code cause_code
cause_code: Enter an integer from 2 to 111; default code is 13 (roaming not allowed in this location area
[LA]).
[LA]).
Refer to the GMM failure cause codes listed below (from section 10.5.5.14 of the 3GPP TS 124.008 v7.2.0
R7):
R7):
• 2 - IMSI unknown in HLR
• 3 - Illegal MS
• 6 - Illegal ME
• 7 - GPRS services not allowed
• 8 - GPRS services and non-GPRS services not allowed
• 9 - MSID cannot be derived by the network
• 10 - Implicitly detached
• 11 - PLMN not allowed
Command Line Interface Reference, Modes C - D, StarOS Release 19
220
Call Control Profile Configuration Mode
regional-subscription-restriction