Cisco Cisco Packet Data Gateway (PDG)
alarm-disable
Entering this command disables the alarm detection for designated sets of alarms.
Product
SGSN
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Channelized Port Configuration
configure > port channelized slot_number/port_number
Entering the above command sequence results in the following prompt:
[local]
host_name
(config-port-
slot_number/port_number
)#
Syntax Description
alarm-disable { all | ds1-e1 | none | sonet-sdh }
[ no | default ] alarm-disable
[ no | default ] alarm-disable
no
Deletes the disable configuration.
default
Returns the settings for disabling alarms to the system default.
all
Disables detection of all SONET/SDH and DS1/E1 alarms.
ds1-e1
Disables detection of the DS1/E1 alarms.
none
None of the alarm detection is disabled so that all DS1/E1 and SONET/SDH alarms are detected.
sonet-sdh
Disables detection of SONE/SDH alarms.
Usage Guidelines
Configure selected alarm detection for the port.
Command Line Interface Reference, Modes C - D, StarOS Release 19
355
Channelized Port Configuration Mode Commands
alarm-disable