Cisco Cisco Packet Data Gateway (PDG)
gtpp charging-agent
Configures the IP address and port of the system interface within the current context used to communicate
with the Charging Gateway Function (CGF).
with the Charging Gateway Function (CGF).
Product
GGSN
SGSN
P-GW
SAEGW
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration
configure > context context_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-ctx)#
Syntax Description
gtpp charging-agent address ip_address [ port port ]
no gtpp charging-agent
no gtpp charging-agent
no
Removes a previously configured charging agent address.
address ip_address
Specifies the IP address of the interface configured within the current context that is used to transmit CDR
records (G-CDR/eG-CDR/M-CDR/S-CDR) to the CGF. ip_address must be entered using IPV4 dotted-decimal
notation.
records (G-CDR/eG-CDR/M-CDR/S-CDR) to the CGF. ip_address must be entered using IPV4 dotted-decimal
notation.
port port
Specifies the Charging Agent UDP port. as an integer from 1 through 65535.
If port is not defined, IP will take the default port number 49999.
Configuring gtpp charging-agent on port 3386 may interfere with a ggsn-service configured with the same
ip address.
ip address.
Important
Command Line Interface Reference, Modes C - D, StarOS Release 19
603
Context Configuration Mode Commands E-H
gtpp charging-agent